Before Using; Before Using For The First Time; Usage Note - Furrion FCR10DCBTA-BL Manual De Instrucciones

Before Using

Before Using for the First Time

1. Remove the exterior and interior packing.
2. Before connecting the refrigerator to the power source, let it stand upright for
approximately 4 hours. This will reduce the possibility of a malfunction in the
cooling system from improper handling during transportation.
3. Clean the interior surface with lukewarm water using a soft cloth.

Usage Note

1. This refrigerator operates on 12VDC, the actual working voltage is from 10.5-17V.
NOTE: The compressor will stop running when the voltage is lower than 10.5V.
2. This refrigerator requires 10.5-17VDC, >=15A power source for normal operating.
Direct connection with AC power source is forbidden.
3. The wire of the refrigerator and outer wire must meet the following requirement:
Wire size The Max. Length (Feet)
14 AWG 3.2 Feet
13 AWG 8 Feet
12 AWG 13 Feet
10 AWG 20 Feet
8 AWG 33 Feet
6 AWG 50 Feet
4. A proper location and reliable grounding device is recommended to avoid electric
shock when using a converter to change the power source from AC to DC.
5. Non professionals are forbidden to dismantle the drive board of the compressor
and the control board.
5
Remarks:
• 13AWG or bigger wire is recommended to be used. 14AWG wire
is not recommended.
• This refrigerator is not equipped with power source. Please buy
the power source in local authorized dealer.