Belkin OmniView F1D082 Manual De Instrucciones página 8

P73227/F1D082/e/AM/man.qxd
1. Power off the Sun Workstation. There is no need to power off the
OmniView ™
2. Connect the 13W3 cable from the video port of the Sun to the 13W3 Sun
video connector on the Sun Adapter.
3. Connect the MiniDIN 8 cable from the keyboard / mouse port of the Sun
to the MiniDIN 8 connector on the Sun Adapter.
4. Connect the PS/2 cable kit cables from the HDDB15, PS/2 keyboard and
mouse connectors of the Sun Adapter to a free port on your OmniView
5. Verify that all connections are correct.
6. Set the DIP switches according to the table below, and to your
monitor's capabilities:
SW1
DOWN
DOWN
UP
DOWN
UP
4/19/00 5:17 PM
Installation
or anything else connected to it.
SW2 SW3
UP UP
DOWN UP
UP DOWN
UP DOWN
DOWN DOWN
4
Page 4
Monitor Resolution
1152 x 900 @ 76 Hz
1152 x 900 @ 76 Hz
1152 x 900 @ 66 Hz
1280 x 1024 @ 76 Hz
1600 x 1280 @ 76 Hz
™ .