Cleaning And Maintenance - Bimar VC118 Folleto De Instrucciones

- Ionising function "
the positive ions in the air, this fuction is On then is selected the button "ION"
(3).
- Timer " ": sets the operating time at which the unit shuts down. Press the
"TIMER" (5), button repeatedly: each press changes the time in 1 hour intervals
(from 1 hour to 12 hours), and the selected duration will be shown on the control
panel. To deactivate the timer, press the button until the timer turns off.
- Swing (right-left) "
turn it off (symbol off).
- Room temperature and function display ("
turn it on (symbol on) or turn it off (symbol off).
To operate the fan, plug it into a socket: the "
hear a "beep" (indicating the standby status); press the "
the fan and select the desired functions.
To deactivate the unit, press the "
turn off the appliance, unplug it from the socket.

CLEANING AND MAINTENANCE

Attention: before normal cleaning, remove the plug from the socket.
 Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive
products.
 Do not immerse any part of the fan in water or other liquid: if this should happen,
do not put your hand in the liquid, but first remove the plug from the socket.
Carefully dry the appliance and make sure that all the electrical parts are dry: in
the case of doubt, ask for professionally qualified help.
 It is essential that the motor's air holes be kept from dust and lint.
 If the fan will not be used for long periods, it must be protected from dust and
humidity; we recommend storing it in its original packaging.
 Should you decide not to use the appliance any more, we recommend making it
inoperative by cutting the power cord (after making sure you have disconnected
the plug from the socket) and make dangerous parts harmless if children are
allowed to play with them.
": this produces a flow of negative ions which neutralise
": press the "SWING" (4) button, turn it on (symbol on) or
" button: the symbol "
15/40
"): press the "DISPLAY" (6) button,
" symbol will light up and you will
" button to activate
" will remain lit. To