Troubleshooting - DeWalt DWE315 Instrucciones Originales

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Unit will not Cord not
start. plugged in.
Circuit fuse is
blown.
Circuit breaker is
tripped.
Cord or switch is
damaged.
POSSIBLE SOLUTION
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit
fuse to blow, discontinue use immediately and have it serviced by an
authorised D WALT repair agent.)
E
Reset circuit breaker. (If the product repeatedly causes the circuit
breaker to trip, discontinue use immediately and have it serviced by
an authorised D WALT repair agent.)
E
Have cord or switch replaced by an authorised D
EN G LI SH
WALT repair agent.
E
35