DENTAURUM Tomas Modo De Empleo página 13

Fig. 1
Lid
Movable ring with
welded coupling
elements
Base body
The tomas -transfer caps are made of plastic and their main purpose is to transfer the
®
oral status onto the model. They fit on all tomas
are vertically plugged onto the hexagon of the tomas
fit only. Together with the tomas
support for temporary crowns.
The tomas -laboratory pins are used to fabricate skeletal anchored appliances in the
®
laboratory. Analogous to the tomas
laboratory pin. The tomas
laboratory pin EP has a mushroom-shaped head. The tomas
with retentions that guarantee secure fixing in the model material.
3. Product overview and indications
The tomas -abutments are designed to fabricate a wide variety of skeletal anchored
®
appliances. The following product overview lists some of the possible indications. Further
information can be found on the Dentaurum website (www.dentaurum.com).
Direct coupling means that the orthodontic appliance is directly connected to the
„ „
tomas -pin via the tomas
®
the force exerted by the appliance.
Indirect coupling means that the orthodontic appliance is fixated on the teeth, just
„ „
as in the conventional techniques. The tooth or the group of teeth that serve as
counter bearing are coupled with the tomas
sufficiently dimensioned wire.
-pin EP, the tomas
®
-pin heads there are two versions of the tomas
®
-laboratory pin SD has a head with cross slot, the tomas
®
-abutment. The tomas
®
-pin heads. The tomas
®
-pin. The hold is achieved by the
®
-transfer caps can be used as a
®
-laboratory pins are provided
®
-pin serves as counter bearing for
®
-pin via the tomas
®
EN
-transfer caps
®
-
®
-
®
-abutment using a
®
13