Operating The Machine - Flex ALP 305 Instrucciones De Funcionamiento

ALP305
– Attachment to magnetic surfaces with the
installed magnets (12)
– Attachment to vertical or horizontal
pipes, posts, pillars, etc. with the
attachment belt supplied with the device
Note
To attach the device to the universal holder:
– Insert the pin (8) into the opening in the
device and secure with the fastening
screw (10).
Switching the power tool
on and off
Note
The switch (3) is both an On/Off switch and
a compensation clamp for the self-levelling
device.
Switch on the machine:
n Rotate the switch clockwise to
"UNLOCK".
.
Switch off the machine:
n Rotate the switch anti-clockwise to
"LOCK".

Operating the machine

n Attach the device to the universal holder.
n Switch on the machine.
The machine levels itself within the self-
levelling range (±3.5°).
Note
If the machine has been positioned at too
steep an angle (>3.5°), a warning signal
sounds and flashing laser beams are
displayed.
In this case:
n Move the machine into a more horizontal
position.
On completion of work:
n Switch off the appliance.
15