Sangean TunPad DPR-202BT Instrucciones De Manejo página 12

Recalling a preset station-DAB and FM
1. Press the Power button to switch on the radio.
2. Press the required waveband by pressing the Source button.
3. Press and release the Preset button to enter preset recall menu.
4. Press the Tuning up/down button to select the preset memory you want to tune to.
Then press the Select button to tune to the preset station.
Note:
The display will show 'Preset Empty' if no station has been stored to that preset.
Listening to music via Bluetooth streaming
You need to pair your Bluetooth device with your TunPad (DPR-202BT) before you can
auto-link to play/stream Bluetooth music through your radio. Paring creates a `bond' so
two devices can recognize each other.
Pairing and playing your Bluetooth device for the first time
1. Before turning on the radio, make sure the key lock is switched off (down).
2. Press the Source button until the Bluetooth status indicator (
indicator flashes indicating the radio is discoverable.
3. Activate Bluetooth on your device according to the device's user manual to link to the
radio. Locate the Bluetooth device list and select the device named 'TunPad.' With
some mobiles (which are equipped with earlier versions than BT2.1 Bluetooth device),
you may need to input the pass code "0000".
4. Once connected, the Bluetooth indicator will remain in solid blue. You can simply
select and play any music from your source device. Volume control can be adjusted
from your source device, or directly from the radio.
5. Use the controls on your Bluetooth-enabled device or on the radio to play/pause and
navigate tracks.
Note:
1) If 2 Bluetooth devices, pairing for the first time, both search for your radio, it will show
its availability on both devices. However, if one device links with this unit first, then the
other Bluetooth device won't find it on the list.
2) If you take your source device out of range, the connection will be temporarily
disconnected to your radio. Your radio will automatically reconnect if the source
device is brought back in range. Be aware that during the period of disconnection, no
other Bluetooth device can pair or link with your radio.
3) If 'TunPad" shows in your Bluetooth device list but your device cannot connect with it,
please delete the item from your list and pair the device with the radio again following
the steps described previously.
4) The effective operation range between the system and the paired device is
approximately 10 meters (30 feet). Any obstacle between the system and the device
can reduce the operational range.
5) Bluetooth/NFC connectivity performance may vary depending on the connected
Bluetooth de vices. Please refer to the Bluetooth capabilities of your device before
connecting to your radio. All features may not be supported on some paired Bluetooth
devices.
) flashes in blue. The
GB
11