Sangean TunPad DPR-202BT Instrucciones De Manejo página 19

Ocultar thumbs Ver también para TunPad DPR-202BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

USB power supply socket
Your radio has a USB socket which is intended only for charging an iPhone or smart
phone and similar devices. Charge time may vary and in some cases may take longer to
charge than when using the manufacturers charging unit supplied with the smart phone.
1. Ensure your radio is switched on .
2. Connect your smart phone to the USB charging socket at the left side of your radio.
3. Your iPhone or smart phone will begin to charge.
4. Once your iPhone or smart phone has charged remove the USB lead.
Note: Do not use USB charging if you want to charge the battery, as the radio will fully
charge the iPhone/Smartphone before you can charge the battery.
Important:
● The charger may not supply power to some USB devices.
● When not using or after charging, remove the USB cable.
● Do not connect power source to USB port. Otherwise there is risk of fire. The USB
port is only intended for charging lower voltage device.
● Do not insert a nail, wire, etc. into USB power supply port. Otherwise a circuit short
may cause smoke and fire.
● Do not connect this USB socket with your PC USB port, as it is highly possible that it
may cause breakdown of the units.
● Never use the USB socket in rainy or moist conditions to prevent moist from entering
the radio.
● Ensure the specification of your external device such as mobile phone, mp3 player
or iPod is compatible with the radio. Please read instruction manual of your external
device before charging.
Safety information for internal rechargeable Lithium-ion battery
The internal rechargeable lithium-ion battery used in this device is able to supply power
for a long period of time. However, even lithium-ion batteries reach a point where they
cannot be recharged. If the battery does not recharge after several attempts, it may be
drained (has a low charge), please contact info@sangean.com.tw for repair information.
However, if you do not want us to replace the battery, you will need to dispose of used
batteries/device in accordance to the laws and regulations in your area. In addition, you
can contact your local electronics retailers or recycling center for disposal.
User Safety Precautions
● Check the room temperature range is 0°C –45° C (32° -113° Fahrenheit) before
charging the battery.
● Do not attempt to disassemble the plastic covering or any parts of the device, as the
materials inside may be toxic and may damage skin and clothes.
● Do not puncture, crush, modify, throw or cause any unnecessary shock to your
battery, as the battery used in this device may present a risk of fire, explosion,
or chemical burn if mistreated.
● Do not leave, charge or use the battery in a car under direct sunlight, near fire or a
heated source.
● Do not immerse, throw, wet the battery in water/seawater.
● Do not use or charge the battery if it appears to be abnormally hot, discoloration,
deformation or abnormal conditions is detected during use, charge or storage.
● Do not leave a charging battery unattended. Keep the battery away from babies and
children.
18

Publicidad

Tabla de contenido
loading

Tabla de contenido