Power On The Radio; Battery Status Indicator - Sangean TunPad DPR-202BT Instrucciones De Manejo

Ocultar thumbs Ver también para TunPad DPR-202BT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Once fully charged the battery will power your radio for up to 16 hours depending on the
volume level. Reduced power, distortion, 'stuttering' sound or battery power indicator in
low are all signs that the battery needs to be recharged.
The AC adaptor should be disconnected from the main supply when not in use.
IMPORTANT:
The AC Adapter is used as the means of connecting the radio to the power supply. The
AC Adapter used for this radio must remain accessible during normal use. In order
to disconnect the radio from the power supply completely, the AC Adapter should be
removed from the power supply outlet completely.

Power on the radio

Before power-on the radio, make sure to set the key lock to its off position (down).There
are two ways to power on your radio.
● You can press the Power button to turn on the radio.
● In addition, the radio can be powered on via NFC: Turn on your NFC feature on your
NFC-enabled device > Hold your NFC-enabled device directly against TunPad's NFC
tag for 2 seconds. Your radio is powered on successfully.
Note: Some devices may ask for confirmation from the user.

Battery status indicator

To check the current battery level, press the Power button to switch on the radio and the
battery status indicator will show on the top right corner of the front panel indicating the
current battery level.
(
3 blocks) Battery is fully charged (more than 75% of battery capacity)
(
2 blocks) Battery is partially charged (between 50 -75% of battery capacity)
(
1 block) Battery is partially charged (between 25 -50% of battery capacity)
(
empty block) Low battery and charging is needed (less than 25% of battery capacity
Note: The greatest working life from the built-in battery will be obtained if it is kept
topped up by recharging after each use of the radio, even if it is only partially discharged.
The battery's working life will be reduced if the product is left in a discharged condition
for a long period of time.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido