Safety Instructions; General Safety Rules; Personal Safety; Work Area Safety - Hilti C 4/36 Manual De Instrucciones

Voltage Type
36 V B 36/3.9
Li‑Ion

4 Safety instructions

4.1 General safety rules

WARNING! Read all instructions! Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury. SAVE
THESE INSTRUCTIONS!

4.1.1 Work area safety

a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate the appliance in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Char-
gers can cause sparks which may ignite
dust or fumes.
c) Keep children and other persons away
from the area while the charger is in use.

4.1.2 Electrical safety

a) The appliance's plug must match the
power outlet. Modification of the plug
in any way is not permissible. Unmodi-
fied plugs and corresponding power outlets
reduce the risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose the appliance to rain or
wet conditions. Water entering an elec-
tric appliance increases the risk of electric
shock.
d) Do not abuse the supply cord. Never use
the supply cord to carry, pull or unplug
the appliance. Keep the cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) Use the charger only indoors and protect
it from rain.
Battery
Li‑ion battery
such as pipes,
Charging Charging
times with times with
C 4/36 C 4/36-ACS
96 min 44 min

4.1.3 Personal safety

Do not wear jewelry such as rings or chains.
Jewelry could cause a short circuit and per-
sonal injury in the form of burns.
4.1.4 Battery charger use and care
a) Use the charger only to charge the Hilti
batteries approved for use with this char-
ger.
b) Do not use a charger if its casing or
electric supply cord is defective.
c) Store chargers out of reach of children
when not in use. Do not allow persons
unfamiliar with the appliance or these
instructions to operate it. Chargers are
dangerous in the hands of untrained users.
d) Maintain the appliance carefully. Check
to ensure that no parts are broken or
damaged in such a way that the appli-
ance can no longer function correctly.
If damaged, have the appliance repaired
before use.
e) Use chargers and the corresponding bat-
teries in accordance with these instruc-
tions and as is specified for this particu-
lar model. Use of chargers for applications
different from those intended could result in
hazardous situations.
f) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
g) When not in use, keep the battery and
the charger away from paper clips, coins,
keys, nails, screws or other small metal
objects that could cause a short circuit
at the battery terminals or the charging
contacts. A short circuit at the battery ter-
Examples
for power
tools
TE 7‑A
en
15