While In Use; Unpacking - Repacking - Chauvin Arnoux F 65 Manual De Instrucciones

1.1.3. WHILE IN USE

„ Never exceed the maximum safe values indicated in the
specifications for each type of measurement.
„ When the clamp-on meter is connected to the measuring circuits,
do not touch any unused terminal.
„ Before changing functions, disconnect the measuring cords from
the circuit being measured.
„ Never perform resistance measurements on a live circuit.
1.1.4. INSTRUCTIONS
Before opening the instrument,
you must disconnect it from the measuring circuits and check that
you are not charged with static electricity, which could destroy internal
components.
A "qualified person» is someone familiar with the installation,
construction, use, and hazards. He/she is authorized to start up and
shut down the installation and equipment, in conformity with the safety
rules.

1.1.5. UNPACKING - REPACKING

All of the equipment has been checked mechanically and electrically
before shipping. Every precaution has been taken to ensure that the
instrument reaches you undamaged. It is wise to check it promptly
in order to detect any deterioration is found, state your reservations
to the carrier.
Attention ! For reshipment, it is best to use the original packaging
and state the reasons for returning the equipment as clearly as
possible in a not enclosed with it.
22