Smart Dlm; Introduction; Software; Hardware - Smart Dlm Kit - Ingeteam INGEREV SMART DLM Manual De Instalación Y Configuración

Ingeteam

3 SMART DLM

3.1 Introduction

The INGEREV SMART DLM energy manager comprises a set of software and hardware elements that
work together to correctly perform the pre-defined functionality.

3.1.1 Software

The SMART DLM control software is supplied as standard with all the compatible equipment:
- INGEREV FUSION STREET
- INGEREV RAPID 50
- INGEREV RAPID ST

3.1.2 Hardware - SMART DLM Kit

The SMART DLM kit is always three-phase. There are three different versions, depending on the
installation power at the meter point and the charging point with which communication is to be
established.
- Smart DLM: up to 65 amps per phase (15 kW @ 230Vac)
- Smart DLM Pro: more than 65 amps per phase for INGEREV FUSION. (metering
transformers not included).
- Smart DLM Pro RAPID: more than 65 amps per phase for INGEREV RAPID. (metering
transformers not included).

3.2 Installation standard SMART DLM

The set of components forming part of a SMART DLM installation are listed below:
- External wattmeter
- RS485 bus
- INGEREV charging point
6
INGEREV SMART DLM
ABW2012IQM01_.docx