Information On This Manual; Scope, Nomenclature And Icons; Target Audience; Symbols - Ingeteam INGEREV SMART DLM Manual De Instalación Y Configuración

Idiomas disponibles

INGEREV SMART DLM

1 Information on this manual

This manual aims to describe the characteristics and use of the INGEREV SMART DLM system, as

well as its connection and configuration for start-up.

This document will generically refer to the units for charging electric vehicles with the term "Charging

point" or "CP", to the INGEREV SMART DLM 2.0 as "SMART DLM" and to the installation as "system"

or "plant".

The following icons will also be used to identify the various devices present in an installation.

Power Grid

The connection of the installation is directed at qualified personnel. Qualified personnel, as referred to

in this manual, means personnel who at least meet the requirements of all safety standards, rules,

regulations and legislation applicable to the equipment installation and operating tasks for all the

elements in the installation.

The responsibility for appointing qualified personnel shall always fall to the company employing the

said personnel. This company must decide which worker is suitable for each specific task, in order to

maintain worker safety and comply with all occupational safety legislation.

The said companies are responsible for providing their personnel with adequate training in work with

electrical equipment and for ensuring that such personnel is familiar with the contents of this manual.

Different symbols will be used throughout this manual, in order to emphasise and highlight certain texts. The

general meaning of these symbols is explained below.

General warning.

Electrical hazard.

ABW2012IQM01_.docx

Wattmeter

General information.

Read the section indicated.

Ingeteam

Charging Point

Tabla de Contenido