Working Chamber; Accessories Container - Ivoclar digital PrograMill Dry Instrucciones De Uso

EN 8

Working chamber

You can mount materials and insert tools into the
working chamber. This is where the materials are
processed.
F . 4 – W
IG ORKING CHAMBER
1. Spindle with collet chuck for picking up tools
2. Measuring key
3. Tool magazine
4. Material holder; rotational axis A
5. Rotational axis B
Colours of the working chamber lighting
If the working chamber lighting is insufficient,
provide additional lighting.
The machine illuminates the working chamber in
different colours. The colour will change depending on
the state of the machine. You will find the colours and
respective machine status in the following table:
Colour
Green The machine is ready for operation.
You can open the working chamber door.
White The machine is ready for operation.
The working chamber door is open.
Blue The machine is operating.
The working chamber door is locked.
Red A machine malfunction has occured.
The working chamber door is locked.
Status
Operating Instructions: PrograMill Dry
Version: 2/19/2021
PrograMill Dry – Machine overview

Accessories container

In the accessories container below the working
chamber, you can store materials, tools, and the
spindle service set.
To access the accessories container, manually pull
it out of the machine.
F . 5 – O
IG PENING THE ACCESSORIES CONTAINER
F . 6 – A
IG CCESSORIES CONTAINER
)
NOT PROVIDED
To close the accessories container, push it into the
machine until it is completely closed.
(
MATERIALS AND TOOLS