Choosing The Installation Site - Ivoclar digital PrograMill Dry Instrucciones De Uso

PrograMill Dry – Installing the machine

Choosing the installation site

The installation site must meet the following criteria:
Firm and even surface, must be able to carry the
n
weight of the machine.
Alternating current source.
n
An operational Residual Current Device / Ground
n
Fault Circuit Interrupter on the electric circuit of
the machine.
Machine requires an external air extraction sys-
n
tem.
Machine requires an external compressed air
n
supply.
Access to the internet.
n
You can find specific values and additional require-
ments in the chapter on technical data.
data
– on page 11
Distances to maintain
NOTICE
Damaging of the machine if safety distances are not
maintained
If you do not maintain the safety distances, the
movable parts of the housing can collide with
obstacles when being opened and get damaged. If the
ventilation openings are covered, the machine may
overheat and get severely damaged.
Ensure that the following safety distances are
always maintained.
 Technical
F
Operating Instructions: PrograMill Dry
Version: 2/19/2021
. 9 – D
IG ISTANCES TO MAINTAIN
EN 13