Safety Warnings And Instructions Concerning Environmental Impact; Use And Operation; Instructions And Warnings For Use And Operation - Angelo Po 0N0GRG Manual De Uso

Caution - Warning
Do not obstruct the fl ue to avoid the tempe-
rature of the combustion components and
products from increasing excessively over
the admissible limits.

SAFETY WARNINGS AND INSTRUCTIONS CONCERNING ENVIRONMENTAL IMPACT

Every organisation is obliged to apply proce-
dures to identify and monitor the eff ects of
its operations (products, services, etc.) on the
environment.
The procedures for identifying signifi cant en-
vironmental impacts must consider the factors
listed below.
– Atmospheric emissions
– Discharge of liquid effl uents
– Waste management
– Soil contamination
– Use of raw materials and natural resources
– Local problems relating to environmental
impact
For this purpose, the manufacture supplies
information which must be considered by all
those authorised to interact with the appliance
during its expected lifetime, in order to prevent
environmental impact.

INSTRUCTIONS AND WARNINGS FOR USE AND OPERATION

Important
Besides being authorised and appropriately
documented,and if necessary,instructed and
trained, users,on fi rst usage, have to simulate
several operations to identify the controls
and main functions.
Use only as intended by the manufacturer
and do not tamper with any devices to obtain
operations other than those intended.
3320070_ut_GB_rev.1

USE AND OPERATION

– All packaging materials must be disposed of
in accordance with the relevant laws in the
country of use.
– During use and maintenance, do not dump
pollutants (oils, fats, etc.) in the environment;
implement separate disposal as appropriate to
the composition of the various materials and in
compliance with the relevant laws.
– If the appliance is scrapped, sort all compo-
nents by characteristics and dispose of them
separately.
Important
Do not dump pollutant material in the envi-
ronment. Dispose of it in compliance with the
relevant laws.
Before use, check that the safety devices
are properly installed and in good working
order.
As well as undertaking to comply with these
requirements, users must apply all safety
regulations and read the description of the
controls and the start-up instructions care-
fully.
- 7 -
GB
ENGLISH