SETTING THE TImE
Hour hand
Minute hand
1. Once the crown is pulled out to the second click, be sure to check and adjust the time.
2. When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is designed
so that the date changes once in 24 hours.
3. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then
turn it back to the exact minute.
12
CROWN
Unscrew and pull out to second
click when the second hand is at
the 12 o'clock position.
Turn to set the hour and minute
hands.
Push back into normal position in
accordance with a time signal.
Screw all the way in until it is
locked.
SETTING THE CAlENDAR
● models with date
● Before setting the date, be sure to set the main time.
Date
1. It is necessary to adjust the date at the end of February and 30-day months.
2. Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not change
properly.
CROWN
Unscrew and pull out to first click.
Turn counterclockwise to set the date.
Push back into normal position.
Screw all the way in until it is locked.
13