Time/Date Setting - Seiko 6A32 Instrucciones

TIME/DATE SETTING

1. The date changes between 11:00 p.m. and 1:00 a.m. while the watch is in operation or when advancing
the hands by turning the crown clockwise, and between 9:00 p.m. and 10:00 p.m. when moving the
hands back by turning the crown counterclockwise. Therefore, note the following.
[AM/PM checking]
*When setting the hour hand, check that AM/PM is correctly set.
*When setting the time by advancing the hands, turn the hour hand past the 1 o'clock marker. If the date
advances, the time is set for the AM period. If it does not change, the time is set for the PM period.
*When setting the time by turning back the hands, turn the hour hand past the 9 o'clock marker. If the
date moves back, the time is set for the PM period. If it does not change, the time is set for the AM
period.
2. When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back
to the exact time.
6
All manuals and user guides at all-guides.com
6
CROWN
Pull out to second click when Second hand
is at the 12 o'clock position.
Turn in either direction to set the time and
date.
Push back completely in accordance with
a time signal.