Vaporesso LUXE NANO Manual Del Usario página 7

6)BP (Bypass mode): Direct output voltage mode depends on
battery level, the higher the battery level the higher the output
voltage, supported coil resistance range: 0.05-5ohm.
7)CCV (Custom Curve of Voltage mode in DIY MENU): you
can use the up and down buttons to customize the curve of
voltage output line,move to the next bar with a quick press of
the fire button , press the mode button to save and exit when
setting is done.
8)TCR-M1/M2 (Temperature Coefficient of Resistance mode ,in
DIY MENU) Note: when in VT and TCR mode, the Celsius and
Fahrenheit can be switched by adjust to its max value in the
main page.
9)SMART ON/OFF(in SET MENU):It is a advanced Variable
Wattage mode, when this function is enable, it can change
intensity according to the coils resistance levels within a safe
limit in VW-H/N/S mode.
10) AUTO ON/OFF(in SET MENU): The Auto function taking
away any operation difficulties switching between VW-H and
VW-N or between VT-H and VT-N.
English 5