Setting The Temperature; Dry Ironing; Steam Ironing - Rowenta DW9250 Instructivo De Operación

2 •

Setting the temperature

Set the iron temperature to suit the type of material using
the temperature control dial.
Temperature control: The temperature control light indi-
cates that the soleplate is heating up. When the tempera-
ture control light goes off , the set temperature is reached
and you can begin ironing.
IMPORT NT The iron takes longer to cool down than to heat up. We recommend that
you start with fabrics to be ironed at a low temperature. For mixed fabrics set the tem-
perature for the most delicate fabric.
TIP lways spray starch onto the reverse side of the fabric to be ironed.
3 • Dry ironing
Set the variable steam control to
and set the temperature to suit the type
of material (care points •, ••, •••).
4 • Steam ironing
You can steam iron from temperature setting •• upwards.
Steam function: The steam level can be set between •
(minimum steam quantity) and
We recommend setting to maximum steam quantity
the iron is at temperature setting •••.
5 • Burst of steam
Ironing label
Synthetic fibres, e.g.
viscose, polyester...
• Press the burst of steam button
to generate a powerful jet of steam.
• Wait a few seconds between each shot before pressing the button
again.
Fabric Temperature control
Silk, wool
Cotton, linen
(maximum steam quantity).
3
•
••
•••
only when
EN