Specifications; Disposal Of Unit - Dentsply Sirona Purevac HVE System Instrucciones De Uso

INSTRUCTIONS FOR REPROCESSING THE HVE HOSE ADAPTER
Reprocessing Step Method
Cleaning & • To disinfect the device, use additional wipes as needed to ensure the
Disinfection: Manual entire outer surface, including seams and crevices, remain visibly wet
(continued) for the contact time recommended by the solution manufacturer.
• Allow the device to air dry.
Cleaning: Internal • At the end of each day, clean the inside of the HVE Hose Adapter
with evacuation cleaner following the manufacturer's directions for
use.
13

SPECIFICATIONS

Warning
Weight
*VoloWipes ® Disinfecting
Wipes have a two minute
Dimensions
contact time.
• The HVE Hose Adapter must
Operating Environment Ambient Temperature: -35 °C to 70 °C or -31 °F to 158 °F
be cleaned with evacuation
cleaner at the end of each
day to maintain its optimal
function.
Transport and Storage
Dentsply Sirona recommends
Conditions
the use of Purevac® SC
Evacuation Cleaner.

DISPOSAL OF UNIT

Dispose of the system components in accordance with federal, state, and local laws.
Any serious incident that has occurred in relation to this device should be reported to the manufacturer and the Competent
Authority of the Member State.
HVE Mirror Tip: 15.5 g or 0.55 oz.
HVE Hose Adapter: < 109.7 g or < 3.87 oz.
HVE Hose Adapter Length: 1.524 m or 60 in.
HVE Hose Adapter Swivel Connection I.D.: 15.875 mm or 0.625 in.
HVE Hose Adapter Valve Connection O.D.: 11.252 mm or 0.443 in.
HVE Mirror Tip Length: 128.53 mm or 5.06 in.
HVE Mirror Tip Valve Connection O.D.: 15.215 mm or 0.599 in.
HVE Mirror Tip Mirror Diameter: 17.85 mm or 0.703 in.
HVE Mirror Tip Bore Opening Area: 90.406 mm or 0.140 in
2
Relative Humidity Range: 10% to 95% non-condensing
Atmospheric Pressure: 50 kPa to 106 kPa or 0.49 atm to 1.05 atm
Ambient Temperature: 10 °C to 40 °C or 50 °F to 104 °F
Relative Humidity Range: 30% to 75% non-condensing
Atmospheric Pressure: 70 kPa to 106 kPa or 0.69 atm to 1.05 atm
2
14