Publicidad
Idiomas disponibles
Idiomas disponibles
3 .
C on n e c tin g th e A C A d a p te r
(1) Connect the AC adapter to the AC adapter power cable.
Note 1:
To connect or disconnect the AC adapter, turn off the power switches of the printer and all the devices to be
connected to the printer. And, unplug the plug of the AC adapter power cable from the electrical outlet.
WARNING [Warning for Safety]
This printer must use the AC Adapter specified below. Otherwise, there may be dangers of fire and/or electrification
occurrence. Please be sure to use our company specifying AC Adapter below.
Part Number:KA02951-0120
(2) Open the connector cover at the rear of the printer by lifting it, and connect the AC adapter cable to the power
socket. Close the cover after connecting the cable.
Note 1:
To connect the AC adaptor, place the printer on its side to make the connection operation easier to perform.
Note 2:
Remove notch of connector cover with Nipper, to maintain the space for the cable of AC adapter.
Otherwise, the cable may be damaged and it may cause a failure.
Printer placed on its side
Note 3 :
To prevent the adaptor from slipping out, the connector section is designed to be tight to fit. When inserting,
(1) pinch the base of the cable, (2) while sliding the outer section of the connector upwards, (3) and insert the
connector until it locks in place with a "click" sound.
Base of the cable
Outer section of
the connector
(3) Confirm that the cable is connected firmly.
(4) Plug the other end of the power cord into the power outlet.
Connector cover
Power connector
Publicidad
