Ce Declaration Of Conformity - Nice D-PRO ACTION Instrucciones Y Advertencias Para La Instalación Y El Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Declaration in accordance with the following Directives: 2014/30/UE (EMC); 2006/42/EC (MD) Annex II, part B
Note: the contents of this declaration corresponds to what is stated in the official document filed in the offices of Nice S.p.a. and, in particular, to the latest
version available before printing this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested
from Nice S.p.A. (TV) I.
Declaration number: 536/NDCC2000
Manufacturer's Name: NICE S.p.A.
Address: Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV) Italy
Person authorised to compile the technical documentation: NICE S.p.A.
Address: Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV) Italy
Type of product: Series D-Pro Action Control units
Model/Type: NDCC2000, NDCC2100, NDCC2200
Accessories: Radio receiver models SMXI, SMXIS and ONEXI, Oview, MOFB, MOFOB, F210B, photostrips for TMF sensitive edge, NDA040
The undersigned Roberto Griffa as Chief Executive Officer, hereby declares under his own responsibility that the product identified above complies with the
provisions of the following directives:
• DIRECTIVE 2014/30/UE OF THE EUROPEAN PARLIAMENT AND COUNCIL of 26 February 2014 on the approximation of the laws of Member States relat-
ing to electromagnetic compatibility (rewritten), in accordance with the following harmonised standards:
EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 on machinery, and amending Directive 95/16/EC (rewritten),
in accordance with the following harmonised standards:
• I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC and that the following essential requirements have been fulfilled:
1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
• The manufacturer agrees to send the national authorities any pertinent information on partly-completed machinery, in response to a motivated request, without affecting its intellectual property rights.
• If the partly completed machinery is operated in a European country with an official language other than the language used in this declaration, the importer must include a translation with this declaration.
• The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011;
EN 60335-2-103:2003 +A11:2009
All parts of the product subject to the following standards comply with them:
EN 13241-1:2003+A1:2011, EN 12445:2002, EN 12453:2002, EN 12978:2003+A1:2009
Oderzo, 21 April 2016
18 – English

CE declaration of conformity

and declaration of incorporation of partly-completed machinery
Rev.: 1
Language: EN
Mr. Roberto Griffa
(Chief Executive Officer)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ndcc2000Ndcc2100Ndcc2200

Tabla de contenido