How To Assemble The Main Unit - Omron Micro Air Manual De Instrucciones

How to Assemble the Main Unit

This unit must be assembled before it is used.
– Parts may fit tightly since they are made to prevent the medication from leaking.
– You must wash and disinfect all removable parts before using the unit.
Assemble the unit after washing, disinfecting, and drying.
(For how to disinfect the unit, refer to Page 18)
General Advice
• Hold the unit securely with both hands.
• Install the parts securely. (You may hear clicks depending on the parts
at the time of installation.)
1
Attach the Mesh Cap on the Medication Bottle.
Insert the
Mesh Cap
Close it
vertically.
securely.
2
Attach the Medication Bottle to the Main Unit.
Align both
electrodes with
each other.
You have finished
installation.
Do not open the
bottle cap.
You have finished
installation.
8
3
Attach the Mask Adapter to the Main Unit.
4
Attach the supplied Mouthpiece or Child's Inhalation Mask to the Mask Adapter.
•
How to attach the Child's Inhalation Mask
You have finished
assembly.
Now you have completed assembling the Main Unit.
– If you are not going to use the unit soon after it is assembled,
disassemble the unit (as shown in the Figure to the right)
and store in the supplied Storage Case or store it in
clean environment.
(For the correct use of the unit, refer to Page 15)
How to Assemble the Main Unit
You have finished
installation.
•
How to attach the Mouthpiece
You have finished
assembly.
9