Philips Respironics DreamStation Guía De Instalación Y Funcionamiento página 3

Ocultar thumbs Ver también para Respironics DreamStation:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
4. Close the accessory door on the therapy device.
Note:
After powering on, up to 30 seconds may elapse before the accessory is ready
to make a connection.
Important!
Connecting to Your Network
1. Navigate to the My Setup menu on your therapy device. Then, select Wi-Fi.
2. The Wi-Fi Accessory will now search for available networks within range of your device.
Select your network when it appears on the screen.
If your network does not appear in the list, scroll to the bottom of the list of networks
and select "Other..." Then, enter the name of your network connection, and select your
network security type.
3. If your network is secure, a Passkey pop-up screen will appear after selecting or adding
your network. Enter your network password in this screen, and then select the green
check mark.
Note:
The bottom row of selections allows you to choose between lower case
letters, upper case letters, numbers, symbols and special characters, or highlight
and select the "X" to cancel.
Close Accessory Door
The accessory will automatically connect within 5 minutes of installation if
a manual call has not been successfully completed.
My Setup Screen
Searching...
Click to cancel
Animated Updating
Screen
Wi-Fi Passkey
Wi-Fi
Click to Setup
Wi-Fi Setup Screen
Available Wi-Fi
Networks Screen
Passkey Screen
3

Publicidad

Tabla de contenido
loading

Tabla de contenido