Timex helix W61 Manual Del Usario página 6

pressing either the stop/reset or start/split buttons.
C. Do what you like.
TIMER
(ABT, DM, WRKS)
Rotate the crown until you get to TIMER mode.
Setting the Timer
This function is for New Year's Eve, cooking frozen pizzas, certain sporting events, and other
circumstances in which you count backward.
A. Pull the crown out to Position 3. SET HR-MIN will appear. Check it out.
B. Rotate the crown to desired hour and minute settings.
C. To set seconds, pull the crown out to Position 4. SET SECOND appears. Check that out, too.
INTERESTING POINT: When 00.00.00 is reached, rotating the crown counterclockwise will bring
up 23.59.59. That's just one second short of a whole day!
Timer Operation
A. Begin timing by pressing the start/split button. A realistic looking hourglass icon (see
Figure 2) will flash and TIMER will be replaced by the set time and descending time.
B. To pause countdown, press the stop/reset button.
C. To restart countdown, press the start/split button again.
D. To stop countdown altogether and reset the darn thing, press the stop/reset button
one more time.
E. When timer reaches zero, a five-second melody is generated and INDIGLO®
Night-light flashes. If you are so inclined, you can nod your head or tap
your foot. Stop the beeping and flashing manually by pressing any
button. STRANGE BUT TRUE: You don't need to be in the
(ABT, DM, WRKS)
Rotate the crown until you get to ALARM mode.
Setting the Alarm
A. Pull the crown out to Position 3. SET ALARM will appear out of thin air.
B. Rotate the crown to set the alarm time in five-minute increments.
NOTE: When you're setting the time, the alarm automatically arms itself — proof is
in the little alarm clock icon (see Figure 2). Although it might appear that alarms have
the right to bear arms, in this case, the word "arm" has nothing to do with weapons.
Alarms have no rights. To disarm, push the crown back to the normal run position (Position
2, see Figure 1.B) and press either the start/split or stop/reset buttons. A corresponding ON or
OFF will appear.
GUESS WHAT? The alarm's catchy melody, the flashing INDIGLO® Night-light, and the flashing
little alarm clock icon will continue for 20 seconds, or until it's stopped manually by pressing any
button. If you ignore the alarm's cry for help, another alarm will sound five minutes later.
ANECDOTAL INFO: Once the alarm has been armed, it will go off every 24 hours without being
asked or reminded, unless disarmed.
Setting the Hourly Chime
A. Pull the crown out to Position 4. SET CHIME appears. You may say "hello" now, if it
pleases you.
B. Toggle chime on or off by pressing either the start/split or stop/reset buttons.
HEY! You'll know the chime is armed because a small musical note icon (see Figure 2)
will appear in TIME/DATE and ALARM modes. The hourly chime can be heard in
any mode.
SET LAP SPLIT (the default setting).
B. Switch formats by rotating the crown or by
TIMER mode for the melody to sound.
F. To reset the timing function, press the
stop/reset button.
ALARM
change to