Setting Surface Controls - LG LRE30955ST Manual Del Propietário

SETTING SURFACE CONTROLS

When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
To turn on a single surface unit
(Right Rear, Left Rear, Left front)
1. Touch ON/OFF for the desired
element position. The display will
flash
(The display will disappear if not
used after 10 seconds.)
2. Touch
power level Hi or
3. Use the
desired power setting.
(Adjustable at any time while the
element is ON.)
4. To turn off the element after
cooking, touch ON/OFF once.
CAUTION
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
CAUTION
• NEVER leave food unattended at high or
medium-high setting.
- Boilovers can cause smoking and greasy spillovers
may catch on fire.
SURFACE CONTROLS COOKING
.
once to turn on the
once for Lo.
/ to choose the
/ is continuously accessible.
To turn on a triple surface element
(Right Front Inner, Middle, Outer)
1. Touch ON/OFF. The display will
2. Touch SELECT for desired element
Setting
Single light • Single Element (6" element)
Double light • Double Element (6" and 9"
Triple light • Triple Element (6", 9" and 12"
3. Touch
4. Use the
5. To turn off the element after cooking,
• DO NOT touch surface elements until it
has cooled down sufficiently.
- The surface elements may still be hot and burns may
occur.
- 9 -
flash .
(The display will disappear if not used
after 10 seconds.)
size.
Size of Element
elements)
elements)
once to turn on the power
level Hi or once for Lo.
/ to choose the desired
power setting. / is continuously
accessible. (Adjustable at any time
while the element is ON.)
touch ON/OFF once.
CAUTION