Environmental Protection; Technical Specifications - Metabo PowerMaxx BS Manual Original

en ENGLISH
G Bit box
For a complete range of accessories, see
www.metabo.com or the main catalogue.
9. Repairs
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service centre.
For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

10. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
To protect the environment, do not dispose of
power tools or battery packs in household
waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).

11. Technical Specifications

Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
U =Voltage of battery pack
n =No-load speed
Tightening torque for screwing:
M =soft screwing application (wood)
A
M =hard screwing application (metal)
B
M = adjustable torque (with torque control)
C
Max. drill diameter:
D =in steel
1 max
D =in softwood
2 max
m =Weight (with battery pack)
G =Spindle thread
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a = Vibration emission value (drilling into
h, D
metal)
a = Vibration emission level (screwing without
h, S
impact)
K = Uncertainty (vibration)
h, ...
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
10
EN 60745 and may be used to compare one tool
with another. It is also suitable for a provisional
estimate of the vibratory load.
The specified vibration level applies to the main
applications of the power tool. However, if the tool is
used for other applications, with different
accessories or is poorly maintained, the vibration
level may vary. This can considerably increase the
vibratory load over the entire working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This can considerably reduce
the vibratory load over the entire working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
A-effective perceived sound levels:
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty (noise level)
pA WA
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
Direct current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).