General Specifications - Tornado 95961 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

General Specifications

The Dual Internal Air Head Assembly creates a heavy duty wet only industrial vacuum. It is designed
to fit onto a 55- gallon rolled top steel drum (Tornado # 95944) for volume pick-up with maximum effi-
ciency. It will pick up wet and moist waste without the need to change any filters. This compressed air
vacuum has no moving parts and has tremendous suction for a portable unit. All recovered products
go into the drum, therefore maintaining peak performance. The included liquid shut off attachments
prevent over filling of the drum. Use for volume pickup of light to medium oils, liquid sludge, and many
other light to medium viscosity liquids. Designed to perform at maximum efficiency with 2" hoses and
attachments (refer to attachments section of this manual).
Unit Speci ications
THE 95961 INCLUDES:
95952 Venturi Powerheads (2)
95000 Jumbo Cover (1)
90442 Deflector (1)
95992 Dual Head Line Connector (1)
90569 Liquid Shut Off (2)
HORIZONTAL RECOVERY (reach)
VERTICAL RECOVERY (lift)
REQUIRED COMPRESSOR
AIR LINE AND COUPLINGS
HOSE ADAPTOR
WEIGHT
3/16" JET (installed) w/1.5" HOSE
3/16" JET 2" HOSE
COMPRESSOR CFM
7/32" JET (included) w/1.5" HOSE
7/32" JET 2" HOSE
COMPRESSOR CFM
1/4" JET (included) w/1.5" HOSE
1/4" JET 2" HOSE
COMPRESSOR CFM
Features.
Capable of wet/moist pickup.
Ideal for materials from water to oil covered metal chips, grindings and shavings.
3/16" (5mm) jets installed. 7/32" (5.5mm) and 1/4" (6mm) jets are included for heavier debris.
90 p.s.i at the gauge (valve fully open) allows for maximum pickup power.
60 p.s.i. at the gauge (valve fully open) allows for lighter liquid pickup power.
A heavy duty 55-gallon rolled top drum is required, and is available from Tornado
ADDITIONAL ATTACHMENTS INCLUDED:
90569 Liquid Shut-Off Float Assembly
90332 2" Hose Adaptor (1)
90324 2" X 16' Neoprene Hose
90683 2" Steel Wand (two-piece) Tool
90317 2" X 22" Squeegee Tool
90444 2" X 18" Round Nozzle Tool
50 ft.
25 ft.
25 h.p.
3/4" (minimum), quick-connect, chicaqo, or fixed
2" Included
75 lbs.
52 CFM/179" Static Waterlift
158 CFM/179" Static Waterlift
94 @ 90 p.s.i.
144 CFM/217" Static Waterlift
152 CFM/217" Static Waterlift
122 @ 90 p.s.i
134 CFM/239" Static Waterlift
151 CFM/239" Static Waterlift
152 @ 90 p.s.i.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido