Connecting The Electrical Cables For The Interior Unit - Qlima SC52 B Serie Manual De Instalación

Outdoor unit
Control cover
Screw
Figure 18

10.2 Connecting the electrical cables for the interior unit.

a. Connect the cable to the indoor unit
b. Indoor/Outdoor connection cable should be H07RN-F type, 2,5 mm².
c. To mount the cable to the interior unit: Open the front panel and the cover plate of the terminal
strip on the right hand side of the interior unit. Figure 19.
Figure 19
d. The cable can be fed through from the back of the interior unit to the terminal strip.
e. Connect the electrical wires to the terminal strip, for the correct location.
G
TAKE CARE
For models with a capacity < 4.5 kW plug the plug into a wall socket.
For models with a capacity > 4.5 kW connect the power supply cable directly the power source.
Do not use a plug and socket as the high current can damage both the terminals of the plug and
the socket and even cause a fire.
Outdoor unit
L N S
Plug connector
or
To indoor unit
L N S
'click'
Secure the cable with cord clamp
4
87 87