Install The Portable Air Conditioner - Hisense AP1019CR1G Instrucciones De Uso E Instalación

Install Exhaust Hose and Adapter
1. Roll the air conditioner to selected location. see "Location
Requirements" in page 4.
2. Preparing the exhaust hose assembly:
Press the flexible exhaust hose into the coupling and the
window exhaust adapter, Both the coupling and window
exhaust adapter have integral clips that snap onto the hose.
flexible exhaust hose
coupling
exhaust hose assembly
3. Insert the coupling into the slot on the back of the air
conditioner.
4. Slide down to lock the hose into place.
A. Flexible exhaust hose assembly
5. Confirm the hose is locked in place before operating.

Install The Portable Air Conditioner

window exhaust adapter
Window Installation
Your window installation kit has been designed to fit most
standard vertical and horizontal window applications. Roll the
air conditioner to selected location. see "Location
Requirements" in page 4.
1. Attach the window exhaust adapter to the outer slider
section (the piece with the large exhaust hole).
NOTE: Product must be used with included Duct
Window installation kit for effective cooling.
A. Outer slider section
B. Window exhaust adapter
7
A
B