Start Up Instructions - Garland ARM 450 Manual De Instrucciones

3. START UP INSTRUCTIONS

Thank you for purchasing the support arm ARM
450, which will help reduce the effort of keeping a
suspended tool at working height.
The capacity of this arm support ARM 450 is between
3 and 5 kg. This support arm can only be used for
machines that weigh between 4 and 8 kg.
3.1. ASSEMBLY
Improperly using the accessory by using more weight
than recommended may result in dangerous situations
for the user. The manufacturer is not liable for these
situations due to abuse.
1. Place the dock on the top tube. At the factory, the
dock is set to maximum.
Upper tube
Spring
2. Attach the upper and lower tubes. Tighten the knob
(A) to fix the tubes into position.
Tubo superior
Tubo inferior
3. By using the knob (B), you can adjust the gap
between the lower and the upper pad to achieve
the most ergonomic position for its back.
Position 1
Position 2
9/16
English
Pomo A
Pomo B
Knob B