To Start Engine - Garland CHIPPER 500 G Manual De Instrucciones

English
¡ATENCIÓN!
TURN ENGINE OFF AND LET ENGINE COOL BEFORE
REMOVING GAS TANK CAP. ALWAYS ADD FUEL AT
WELL-VENTILATED PLACE.
KEEP GASOLINE FROM SPARKS, OPEN FLAMES,
HEAT AND OTHER IGNITION SOURCES.
DO NOT OVERFILL FUEL. THE FUEL LEVEL SHOULD
BE ALWAYS BELOW THE LOWEST POSITION OF THE
FUEL TANK NECK.
CHECK FUEL LINES, TANK, CAP AND FITTINGS
FREQUENTLY FOR CRACKS OR LEAKS. REPLACE IF
NECESSARY.
PREVENT SKIN FROM FREQUENT CONTACT WITH
GASOLINE.
KEEP CHILDREN AND THE FRAIL AT A SAFE
DISTANCE DURING REFUELLING.
Adding fuel:
- Remove fuel cap.
- Fill tank to the lowest position of the fuel tank neck.
Do not over fill:
- Wipe any gasoline that may have spilled.
- Reinstall the fuel cap.
- Fuel tank capacity: 3.6L

TO START ENGINE

Before starting engine:
- Make sure check the engine oil and fuel tank
before starting the engine.
WARNING!
DAMAGE TO YOUR EYES, HANDS, AND
EARS COULD RESULT FROM USING THIS
MACHINE WITHOUT PROPER PROTECTIVE GEAR.
ALWAYS WEAR SAFETY GLASSES, HEARING
PROTECTION, AND LEATHER GLOVES WHEN
OPERATING THIS MACHINE.
LOOSE HAIR AND CLOTHING COULD GET CAUGHT
IN THE MACHINERY AND CAUSE SERIOUS
PERSONAL INJURY. KEEP LOOSE CLOTHING
AND LONG HAIR AWAY FROM MOVING
Start up with a cold engine:
Place the engine switch on the ON position.
24/52
MACHINERY.