Battery Replacement - BEHA LanTest 50 Manual De Manejo

6.3

Battery Replacement

If the Code "Lo" is illuminated on the instrument display, you have to proceed with
the battery replacement. Prior any measurement, disconnect teh instrument from
all circuits.
The operator must comply with the references as described in section 2.0
regarding the handling of batteries
Switch off the instrument via the slide switch (1). Remove the casing rear
Connect the battery supplied by respecting the polarity to the battery clip.
Replace the casing rear.
Please think of our environment when disposing of your used batteries. They
belong in a rubbish dump or a refuse collection place for hazardous waste.
Most batteries can be returned to their point of purchase.
The appropriate valid regulations regarding return, recycling and disposal
of used batteries and storage batteries must be respected.
37