Startup Procedure; Inserting / Replacing Batteries; Secure / Switch On / Off The Light; Cleaning - LIVARNO LUX 14106204L Instrucciones De Utilización Y De Seguridad

Startup procedure

Inserting / replacing batteries

Slide the battery cover
remove it (see Fig. A).
Insert the batteries
attention to polarity (+ and -).
Put the battery cover
direction to the arrow (see Fig. B).
Hint: Make sure that the battery cover
place.

Secure / switch on / off the light

Note: Ensure that the adhesive surfaces are free from grease and
dust.
Use the magnetic adhesive foil
to a magnetic surface.
Remove the protective film from the magnetic adhesive foil
and attach to the back of the light (see Fig. C).
or
Stick 2 self-adhesive pads
to a level and dry surface (see Fig. D).
Switch the light on by pressing the middle of the transparent
object .
1
Switch the light off by pressing the middle of the transparent
object again.
1

Cleaning

Remove the batteries from the device prior to cleaning.
Use a dry cloth to clean the light - never use petrol, solvents or
cleaners that attack plastics.
Use a slightly moist cloth to remove any stubborn dirt.
18 GB/IE
in the direction of the arrow and
6
into the battery compartment, paying
5
back and slide it in the opposite
6
if you want to attach the light
3
to the back of the light and attach
4
is securely locked in
6
3