Setting Up Digital Channels Manually; Editing Channel List - Pioneer PDP-5016HD Manual De Instrucciones

Tuner Setup
• "Scan Analog Channel" function is available only when the input
source is set to "ANALOG CH". (See page 19.)
• You can also select the channel number by pressing the numeric
buttons directly.

Setting up Digital Channels Manually

This section describes how to manually set up Digital channels.
The channel numbers are fixed according to the broadcasting
stations.
1
Press the MENU button.
2
Press the c or d button to move to Tuner Setup, then
press the OK button.
3 Press the c or d button to move to Scan Digital
Channel, then press the OK button.
4 Press the c or d button to move to Channel.
Scan Digital Channel
Channel
Store
6 - 1 DTV
Strength
5 Press the [ or \ button to select the channel number
which you want to scan.
• If the broadcasting station is scanned to the selected
channel, a numerical value of "Strength" will increase.
6 Press the c or d button to move to Store, then press the
OK button to store.
Scan Digital Channel
Channel
Store
6 - 1 DTV
Strength
7
When finished scanning, press the EXIT button.
• "Scan Digital Channel" function is available only the input source is
set to "DIGITAL CH". (See page 19.)
• You can also select the channel number by pressing the numeric
buttons directly.
6
30%
6
30%

Editing Channel List

This section describes how to edit the Channel List. You can
preset the desired channels using the FAVORITE CH button
to quickly tune in a favorite channel.
1
Press the MENU button.
2 Press the c or d button to move to Tuner Setup, then
press the OK button.
3 Press the c or d button to move to Edit Channel List,
then press the OK button.
Tuner Setup
Scan Channels
Scan Analog Channel
Scan Digital Channel
Edit Channel List
• The channel list is displayed.
4
To delete a channel from the channel list, select the
required channel by pressing the c or d button, then
press the CH DELETE button twice.
• The channel is deleted.
FAV
Favorite Channel
Delete FAV
DEL FAV
5
If you want to set the favorite channels, select the
required channel by pressing the c or d button, then
press the FAVORITE CH button.
• The selected channel is stored with "
6
Press the EXIT button.
• When ANALOG CH is selected, an Analog Channel List is displayed.
When DIGITAL CH is selected, a Digital Channel List is displayed.
• Press the CH buttons to move to the next or previous page.
• The channel list displays the channels of those scanned by the
scanning channel functions.
• If you want to cancel the Favorite mode, press the FAVORITE CH
button while " FAV " is displayed.
08
" displayed.
FAV
25
En