Mattress Tool Maintenance; Cleaning The Dust Container; Cleaning The Nozzle - LG LcV900B El Manual Del Propietario

Mattress Tool Maintenance

Note: Do not submerse the entire mattress tool
under water, this could damage the tool.

Cleaning the Dust Container

Turn the dial on the end of the container
➊
counterclockwise one half turn to allow the dust
from the container to be sucked up into the
vacuum during use.
To remove the dust container from the tool, turn
➋
the container clockwise to remove.
Empty the dust from the dust container into the
➌
trash.
To reinstall the dust container, align the arrows
➍
on the container and the tool and turn
counterclockwise until the container locks into
place.
CARE & CLEANING

Cleaning the Nozzle

Turn the tool over and press in on the tabs to
➊
release the cover plate.
Remove any dirt or debris from inside the nozzle
➋
using a dry cloth.
Run the cover plate under warm water to remove
➌
any dirt. Make sure the plate is dry before the
next use.
Align the tabs of the cover plate to the mattress
➍
tool.
Push down the tabs to secure.
➎
21