8 Agitator Maintenance; 8 Replacing The Agitator Belt - LG LcV900B El Manual Del Propietario

CARE & CLEANING
Agitator Maintenance
WARNING
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
Frequently check the agitator brush area for hair,
string and lint buildup.
Remove the Agitator Brush Cover:
1. Unplug the canister. Disconnect power nozzle
from the wand.
2. Turn the power nozzle over, so that the agitator is
facing up.
3. Set the power nozzle on a cloth or a smooth
surface.Remove the six screws on the bottom of
the head and remove the cover.
4. Carefully remove any accumulated string, hair,
etc. from the agitator and the agitator area.
To reinstall the cover,
reverse the steps above.
18
Replacing the Agitator Belt
WARNING
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before
servicing. Failure to do so could result in
electrical shock or personal injury.
If the belt breaks, follow the steps below to replace
the agitator belt.
To Replace the Belt:
1. Remove the agitator brush cover.
2. Lift the agitator straight out.
3. Unhook the old belt from the drive pulley. Make
sure no pieces of the broken belt are trapped in
the agitator or drive pulley area.
4. Hook the new belt over drive pulley of agitator motor.
5. Fit the agitator through the belt, making sure the
belt is aligned with the pulley section of the
agitator.