Connections To Be Made; Important Warning - Axxess BX-CH5 Instrucciones De Instalación

Applications
CHRYSLER
200 LX 2015-up
DODGE
Dart (small screen option) 2013-up
FIAT
500L 2014-up
JEEP
Cherokee Sport 2014-up

IMPORTANT WARNING

This product includes instructions for an installation which must be care-
fully followed. The instructions are worded in such a manner as to assume
that the Installer is capable of completing this type of electronic installation.
If you are unclear as to what you are instructed to do, or believe that you
do not understand the instructions so as to properly and safely complete
the installation, then you should consult a technician who does have this
knowledge and understanding. Failure to follow these instructions carefully,
and to install the interface as described, could cause harm to the vehicle
or to the safety systems in the vehicle. Interference with certain safety
systems could cause harm to persons as well.
RAM
1500, 2500, 3500
(small screen option) 2013-up
Chassis Cab 3500, 4500, 5500
(small screen option) 2013-up
Promaster (with a 5.0" screen) 2014-up
Promaster with NAV 2014-up
Promaster City 2015-up
BX-CH5

Connections to be made

Attention!
This interface will work with models that are either factory
amplified, or non-amplified. Please follow the instructions carefully for your
model vehicle. Failure to do so will result in either no sound, or low sound.
If you are unsure if your vehicle is factory amplified or not, please contact
your local Dealer.
From the 16-pin harness with stripped leads
to the aftermarket radio:
• Connect the (2) Red wires to the accessory wire.
• Connect the Orange/White wire to the illumination wire. (If the aftermarket
radio has no illumination wire, tape off and disregard this wire.)
• Tape off and disregard the Brown wire, it will not be used in this application.
For models without a factory amplifier:
• Tape off and disregard the Blue/White wire, it will not be used in this
application.
• Tape off and disregard the White, White/Black, Gray, Gray/Black, Green,
Green/Black, Purple, and Purple/Black wires, they will not be used in this
application
2
Continued on the next page