Wall mounting
The telephone can be mounted on a wall by using
the wall mount bracket (included) and two screws
(not included).
Warning!
Make sure that no cables, water pipes or gas pipes
are located inside the wall before drilling into it.
1.
Drill two holes in the wall, vertically 3.26 in (83
mm) apart. .
2.
Insert the screws, allowing them to project
~2 in (~5 mm) out from the wall.
3.
Unplug and remove the handset.
4.
Fit the guide tabs (A) on the bracket into the
slots (B) on the back of the telephone. Then
slide the bracket upwards until it snaps into
place.
English
B
A
11