Wall Mounting - Doro aub200h Manual De Instrucciones

Tabla de contenido

Publicidad

Important!
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care should
be taken when placing the handset near these items.
Connection
1. Connect the curly cord to the handset and the socket marked
the telephone cord to the socket marked
telephone network socket.
2. Lift the handset and listen for the dial tone. Your telephone is now operational.
Hearing Aid compatible
This telephone is hearing aid compatible. Select T mode on the hearing aid to enable coupling.
Connection of headset
An additional headset can be connected to the socket on the side of the telephone
marked
.
=
To access an incoming call or dial press
The LED next to the headset button will illuminate when activated.
Please note!
DORO original headsets are tested and adapted for this telephone. Other types and makes of headsets
may be used, though the function and sound quality can not be guaranteed.
Any damage occurring due to incompatible or non Doro headsets being installed, will not be covered
under the telephone guarantee.
Connection of additional equipment
On the right side of the telephone there is a socket marked 8. This is used for
connecting additional telephone equipment to the same telephone line, e.g. a wireless
telephone, modem, etc.

Wall mounting

The telephone can be wall mounted using an optional wall mount bracket.
The wall mount bracket is available as an accessory, part number WB200/300 in white
or black.
1. Fix the wall mount bracket on the back of the telephone.
2. Secure two screws, vertically positioned 83 mm apart.
3. The screws should locate into the two keyholes on the wall mount bracket.
English
on the telephone and then to the
t
, to terminate a call press
=

. Then connect
Q
again.
=

Publicidad

Tabla de contenido
loading

Tabla de contenido