Fixing The Surround; Configuring The System Software; Entering And Exiting Configuration Mode - Dometic CoolAir RTX1000 Instrucciones De Instalación

Configuring the system software

7.7

Fixing the surround

A
NOTICE!
Tighten the screws carefully in order not to damage the surround.
➤ Fix the surround in place as illustrated (fig. a).
8 Configuring the system software
Before the system is first put into operation, the control unit settings can
be adjusted to suit the various installation conditions. Those adjustments
must be made by the installer.
Display
indication
P.01
P.02
I
NOTE
Configuration mode can still be activated if the low voltage cut-out has
switched off the system and only residual voltage is available.
8.1

Entering and exiting configuration mode

➤ Press and hold the
➤ Press and hold the
✓ The display shows the symbol
✓ The parking cooler switches to configuration mode.
✓ The display shows "P.01" and the symbol
➤ Scroll through the menu by pressing the
desired menu item.
➤ Press the
➤ Press and hold the
mode.
12
Parameter Meaning
Low voltage The battery monitor shuts down
shut-down the system at the voltage defined
here.
Unit for tempera- The temperature can be
ture display displayed in °C or °F.
button.
button for longer than 3 s.
button to open the desired menu item.
button for longer than 3 s to exit configuration
CoolAir RTX1000, RTX2000
.
flashes.
or button to select the
Factory
setting
22.8 V
°C
EN