Cleaning The Filters - Easy Home VC9385S Manual Del Usuario

Cleaning
NOTICE!
Risk of damage!
Improper handling of the product may result in damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like. They could damage
the surfaces.
− Never immerse the motor unit in water or any other
liquids and do not rinse it under the tap or with a hose.

Cleaning the filters

NOTICE!
Risk of damage!
Improper handling of the product may result in damage.
− Do not clean the filters with any chemicals as this will
destroy them.
1. Remove the dirty water tank
dirty water tank".
2. Remove the exhaust filter housing
3. Pull out the filter
4. Rinse the filter with warm water. Allow the filter to dry thoroughly.
5. Replace the filter and put the exhaust filter housing back into the dirty
water tank.
6. With the dirty water tank still removed, pull out the motor filter
(see Fig. J).
7. Rinse the motor filter with warm water (max. 104 °F / 40 °C). Allow the motor
filter to dry thoroughly.
8. Replace the motor filter and put the dirty water tank back into the product
as described in the chapter "Emptying the dirty water tank".
18
7
as described in the chapter "Emptying the
20 from the exhaust filter housing (see Fig. I).
8 from the dirty water tank (see Fig. H).
21