Emptying The Dirty Water Tank; Cleaning - Easy Home VC9385S Manual Del Usuario

Emptying the dirty water tank

CAUTION!
Risk of injury!
Improper handling of the product may cause injury.
− Always unplug the product before emptying the dirty
water tank.
An automatic shut-off device prevents the product from picking
up more dirty water than the dirty water tank can hold. You will
know the dirty water tank needs to be emptied when:
• the motor sound rises in pitch,
• the dirty solution has reached the FULL line
1. Unplug the product.
2. Unlock the dirty water tank
10
latch and lifting up the dirty water tank handle
(see Fig. E).
3. Remove the dirty water tank from the product.
4. Open the dirty water tank cap
grip points to the word "unlock" (see Fig. F).
5. Empty the dirty water tank, replace the dirty water tank cap and turn it to
the "lock" position. Then place the dirty water tank back into the product
(see Fig. G).
6. Push the dirty water tank handle down until the dirty water tank locking
latch clicks into place.

Cleaning

CAUTION!
Risk of injury!
Improper handling of the product may cause injury.
− Always unplug the product when not in use, refilling the
tanks, cleaning it, or performing maintenance.
water tank.
7
by pressing the dirty water tank locking
19
by turning it counterclockwise, so the
Cleaning
6 in the dirty
9
at the same time
17