Installing The Monitor - SOMFY V100+ Manual De Instalacion Y Uso

Ocultar thumbs Ver también para V100+:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
EN
NB
If you wish to control your Somfy RTS gate motorisation remotely via the monitor, you must program the radio control before definitively
installing the monitor (the monitor must be brought to the gate motorisation while connected to the mains power adapter).
See section 7.3 Programming a Somfy RTS gate motorisation.
[1]. Fix the monitor mounting plate to the wall.
Important: Ensure the direction of fitting is correct by
positioning the arrow upwards ("UP" facing upwards) as
indicated on the illustration.
Note: You can also use the mounting screws provided in
standard flush-mounting boxes; the distance between the
plate mounting holes is the same.
[2]. Remove the DC connector from the rear of the monitor and
connect the cable from the power adapter to this connector:
white wire with black lines on the right (+) and completely
white wire on the left (-).Note: You can use a mains adapter
compatible with the DIN rail as an option (ref.: 9026469).
[3]. Connect the power plug connector to the DC input at the rear
of the monitor in the direction indicated in the illustration
(screws to the right); the direction in which the wires are
connected to the power plug is important.
Important: It is essential to use the mains power adapter
provided or the DIN rail mains adapter (optional) to supply
the monitor.Connect the door station connector to the rear of
the monitor as shown in the illustration.
You can also connect a second, optional monitor to the
terminal's third connector (for more information, see the
additional monitor instructions).
[4]. Clip the monitor onto its mounting bracket by first positioning
the top of the monitor on the station, then the bottom.
Note: Position the mains power adapter wires between the
mounting bracket and the monitor.
7

4. INSTALLING THE MONITOR

1
2
3
4
Monitor
Finish all of the cabling before connecting the monitor to
the mains.
Video phone V100+
60 mm
Power adapter wires
To a second
monitor
(optional)
To the door
station
Copyright © 2019 SOMFY ACTIVITES SA. All rights reserved.

Publicidad

Tabla de contenido
loading

Tabla de contenido