Product Specifications; Safety Information - Kobalt SGY-AIR134TZ Manual Del Usario

PRODUCT SPECIFICATIONS

COMPONENT
SQUAR E DRIVE
FREE SPEED
MA XIMUM TORQUE
AVERA GE A IR CONSUMPTION
A IR INL ET
A IR HOSE
WORK ING PRESSURE

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate
or maintain this product. If you have any questions, please call our Customer Service
Department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m. EST, Monday – Friday.
Improper operation or maintenance of this tool could result in serious injury and
property damage. Read and understand all warnings and operation instructions
before using this tool. When using any tool, basic safety precautions should always
be followed to reduce the risk of personal injury. Use each tool for its intended function
only. Do not use this product in unsafe work conditions. It is always recommended to
keep a fire extinguisher and first aid kit near work areas.
FAILURE TO OBSERVE AND FOLLOW SAFETY INSTRUCTIONS COULD RESULT
IN INJURY OR DEATH.
Some dust created by paint spraying, power sanding, sawing, grinding, drilling and
other related activities is known to the State of California to cause cancer, birth
defects and other reproductive harm. A listing of chemicals can be obtained from
www.oehha.ca.gov under proposition 65.
Some examples of these chemicals are:
Lead from lead based paints
Crystalline silica from bricks, cement and other masonry products
Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals, work in a well ventilated area and
wear appropriate/approved safety equipment such as respirators or dust masks which
are specially designed to filter microscopic particles.
SPECIFICATIONS
1/2 IN.
7,200 RPM +/- 10%
350 FT.-L B S.
7 CF M
1/4 IN. NPT
3/8 IN.
90 PSI
WA R N I N G
WA R N I N G
3