Kobalt SGY-AIR134TZ Manual Del Usario página 7

SAFETY INFORMATION
WA R N I N G
WHAT COULD HAPPEN
Wrenches and adjusting keys that are
left attached to a rotating part of the tool
may fly off and increase the risk of
personal injury.
Using inflator nozzles for duster
applications can cause serious injury.
Air tools can become activated by
accident while being handled, during
accessory changes, tool changes,
maintenance or repair.
Air tools can cause the workpiece to
move upon contact, leading to injury.
Loss of control of the tool can lead to
operator injury or injury to others in the
work area.
RISK OF PERSONAL INJURY
HOW TO PREVENT IT
Always remove and secure adjusting
keys and wrenches before operating
the tool.
DO NOT use inflator nozzles for duster
applications. Do not use inflator nozzles
for any use other than the one intended.
Disconnect the tool from the air supply
during accessory changes, tool changes,
maintenance or repair.
Never carry the tool by the air hose.
Never yank the air hose to disconnect it
from the tool or the air supply.
Always carry the tool by the handle.
Avoid unintentional operation. Never
carry the tool with the trigger depressed
or engaged. Do not lock, tape or wire the
trigger for continuous operation.
Only an authorized service representative
should do repair servicing.
Always make sure the workpiece is
secure. Use clamps or other devices to
prevent movement.
Always shut off the air supply and
release/drain air pressure from the hose
before changing accessories, making
repairs. When tool is not in use,
disconnect it from the air supply and
store the tool in a safe location.
Never operate tools while using drugs
or alcohol.
Do not overreach or stretch to operate
the tool.
7