Sony RDP-XA900iP Manual De Instrucciones página 11

• To switch the unit between the standby mode
and network standby mode, press and hold the
?/1 button until the colour of the ?/1 indicator
changes.
E "iPod", AUDIO IN, BLUETOOTH
PAIRING buttons, indicators
Selects a source device (page 15, 18, 20).
Lights up amber (iPod or AUDIO IN) or
blue (Bluetooth) according to a selected
source.
The BLUETOOTH indicator shows
Bluetooth connection status.
Blue (lit): Connection has been
established.
Blue (flashing slowly): Connection is
being established.
Blue (flashing quickly): Pairing mode is
activated.
F "AirPlay" indicator
Lights up green when the unit is in the
"AirPlay" mode.
G LINK indicator
Indicates the connection status of the
wired/Wi-Fi network.
Green (lit): Wi-Fi connection has been
established.
Green (flashing): Wi-Fi connection is
being established.
Amber (lit): Wired connection has been
established.
Amber (flashing): Wired connection is
being established.
Red (flashing): One of the following has
occurred.
– This unit cannot find the wireless LAN
router/access point.
– The security method/password selected
for the wireless LAN router/access point
is wrong.
– An error has occurred.
Not lit: The Wi-Fi network setting process
is not finished.
H UPDATE button, indicator
Press and hold to start updating the
software of the unit (page 20).
Indicates the update status of the unit.
Green (lit): The unit can be updated.
Green (flashing): The unit is updating.
Not lit: The unit does not need updating.
I u (Play/Pause) button
Starts playback of iPod or a Bluetooth
device. Press repeatedly to pause/resume
playback.
J VOLUME +/– button
Adjusts the volume.
7
GB