Position; Language; Identification; Reset - Sharp LB-1085 Manual De Operación

On-Screen Display Menu

Position

For adjusting a picture's horizontal and vertical

position.

H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
•
For resetting adjustments to the factory preset values,
press / to select "Reset", and then press
ENTER.
•
When connecting a PC to the HDMI terminal, the
image position will be automatically adjusted. It cannot
be manually adjusted.
•
The screen position variable ranges depend on the
View Mode or the signal type.
•
Adjustments are stored separately according to input
source.

Language

You can also select a language from the Setup
menu. Select from among 4 languages: English,
French, Spanish and German.

Identification

The current version of the LCD Monitor software is
displayed on the top.
The approximate total use time of the backlight is
displayed on the bottom (in the unit of 500 hours).
Use this value as a reference to determine the time
of backlight replacement.
•
The use time includes the use for factory inspection
conducted before shipment.

Reset

If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
1 "Return to the factory preset values" displays
on the screen.
2 Select "Yes".
•
"Now, Monitor will restart automatically. OK?"
displays on the screen.
3 Select "Yes".
•
"Now initializing..." displays on the screen and
blinks. After the reset has been completed, the
power shuts off and then comes back on. The
screen will have returned to its original settings.
•
The Language settings will not be changed.
•
The Monitor Location settings will not be changed.

Option Menu

Example
Option

Audio Only

Output Select
Game Play Time
Operation Lock Out
1 Press MENU to display the MENU screen, and
then press / to select "Option".
to select a specific adjustment
2 Press /
item and then press ENTER.
3 Press / (or
setting, and then press ENTER.
Press MENU to exit.
4

Audio Only

When listening to music from a music program, you
can turn the screen off and enjoy audio only.
On: Audio is output without screen image.
Off: Both screen images and audio are output.
•
The screen image will return to normal when a button
(except those for audio adjustment, such as VOL,
MUTE) is pressed.

Input Select

If the image does not come in clearly from the
external equipment connected to INPUT 3 or INPUT
7 (DVI), you may need to change the input signal
type setting on the "Input Select" menu.
Selecting input signal type (INPUT 3)
■
Select the input signal type from the list below:
Auto/COMPONENT/VIDEO
•
If the selected signal type is incorrect, images are not
displayed at all or are displayed without any color.
• Refer to your external equipment operation manual for
the signal type.
•
If you set INPUT 3 to Auto, the LCD Monitor will
automatically select the input signal.
•
Setting INPUT 3 signal selection to "Auto" when other
equipment is connected will result in the following
connection priority.
COMPONENT VIDEO
VIDEO
Selecting DVI input signal type (INPUT 7)
■
Select the input signal type from the list below:
Auto/DIGITAL/ANALOG
[Fixed]
[Off]
[Off]
/ ) to select the desired
27