Using Digital Audio Output; Connecting Hdmi Equipment - Sharp LB-1085 Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparation
When using DVI Cable (INPUT 7):
Blu-ray disc player/DVD player
To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the
equipment to 1080p output.

Using Digital Audio Output

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the
terminal.
To optical digital input of
external audio devices
Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.

Connecting HDMI Equipment

You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI equipment
When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
To enjoy 1080p display capability, connect your Blu-ray disc player or other external equipment using an HDMI-
certified cable and set the equipment to 1080p output.
*
Use a commercially-available HDMI cable complying with HDMI standards. Using a non-standard cable will not
function normally, resulting in video not being shown or sound not being produced.
*
Set the player not to use the HDMI CEC function such as AQUOS LINK. Using the HDMI CEC function may cause
malfunction.
DVI cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
Optical fiber cable
(commercially available)
HDMI-certified cable*
(commercially available)
15

Publicidad

Tabla de contenido
loading

Tabla de contenido